Electronic Structure
The properties of atoms arise from the interactions between their nuclei and electrons.. Atoms are made up of a positively charged nucleus. In the nucleus are positively charged protons and neutral neutrons . Negatively charged electrons orbit around the nucleus. Electrons can be easily added to or removed from most atoms.
According to Coulomb's Law, like charges repel each other and unlike charges attract each other. The higher the charge, the greater the attraction and repulsion, and the greater the distance between the charges, the less the attraction and repulsion. The properties of atoms can be explained by opposite charges attracting each other, and like charges repelling each other.
In an atom, electrons arrange themselves into shells, subshells, and orbitals.. Each orbital can contain up to two electrons. s subshells contain one orbital (up to 2 electrons), p subshells contain three orbitals (up to 6 electrons), d subshells contain five orbitals (up to 10 electrons). Larger subshells (f, g...) are rarely used in introductory chemistry.
Electron Configuration and the Periodic Table
Electron configuration is the distribution of electrons of an atom or molecule in atomic or molecular orbitals. In the distribution of electrons, the following should be remembered :
• The order of increasing energy in given subshells is:
1s < 2s < 2p < 3s < 3p < 4s < 4d < 4p < 5s
• Lower energy shells and subshells are filled first before filling up the next higher energy level and subshells
• Core electrons are electrons in the filled shells and they are tightly bound to the atom
• Valence electrons are electrons at the outermost shell. These electrons are more easily removed than the core electrons.
In the electron configuration of sodium ( 1s22s22p63s1 ) :
In 1s22s22p6 – there are 10 ( 2+,2 + 6 ) core electrons and 1s, 2s, and 2p are
filled shells
in 3s1 – the lone electron in 3s is the valence electron and 3s is the valence shell
Electron Configurations of Ions
Ions are formed when atoms gain or lose electrons. A cation forms when one or more electrons are removed from a parent atom. For main group elements, the electrons that were added last are the first electrons removed. For transition metals and inner transition metals, however, electrons in the s orbital are easier to remove than the d or f electrons. An anion forms when one or more electrons are added to a parent atom. The added electrons fill in the order predicted by the Aufbau principle.
Example : Write the electron configuration and orbital diagram of Na and Na + .
Answer:
1. Na: 1s22s22p63s1 2. Na+ : 1s22s22p6 ( sodium cation loses 1 electron )
1s 2s 2p 3s 1s 2s 2p
Periodic Table
Early attempts were made to classify elements ever since the discovery of metals. Some grouped metals separately from non-metals and some applied formulation of arithmetic to the known atomic weights of certain elements.
J.W. Dobereiner in 1817 discovered that when closely related elements are grouped in a set of three, the atomic weight of the middle element had an atomic weight almost the arithmetic mean of the other two elements in that group. Ex.
Element Lithium Sodium Potassium
Atomic weight 6.94 22.99 39.10
Mean atomic weight ----- 23.02 ------
He called such a group of three elements a Triad. He could group only a few elements due to lack of knowledge of correct atomic weights of the elements at that time.
In 1863, J.A.R. Newlands developed a system of classification of elements and entitled it Law of Octaves. He arranged the elements in such a way that every eight element had similar properties, like the notes of music. The law could not apply to a large number of known elements. However, the law indicated very clearly the recurrence of similar properties among the arranged elements. Thus the periodicity was visualized for the first time in a meaningful way.
More significant results were obtained when Lother Meyer’s work reflecting the periodicity was found to be based on physical properties of elements. He clearly showed that certain properties showed a periodic function.
Mosely, in 1913, showed that the properties of the elements are periodic function of their atomic numbers. He arranged all the elements according to the increasing atomic number.
Atomic number itself was discovered in 1913 by a team lead by Mosely. Table based on atomic number is term as Modern Periodic Table.
The arrangement of elements in the periodic table is a perfect matching of electron configuration of the elements and their physical and chemical properties. Some important considerations of the modern atomic structure applied to the classification are;
• an atom loses electrons from or gains electrons in the outermost orbit of an atom during a chemical reaction
• the sharing of an electron or electrons by an atom with other atom or atoms is largely through the outermost orbit. Thus the electrons in the outermost orbit of an atom largely determine the chemical properties of the elements
It can be concluded that the elements possessing identical outer electronic configuration should possess similar physical and chemical properties and therefore they
should be placed together for an easy and systematic study.
Structural Features of the Periodic Table
• There are 18 vertical columns called groups. They are numbered from 1 to 18. Each group has a unique configuration.
• There are seven rows of boxes filled with elements. These rows are called periods.
• First period - consists of only 2 elements.
Second and third periods - consist of 8 elements each
Fourth and fifth period - consist of 18 elements each.
Sixth period and seventh period - consist of 32 elements each
The International Union of Pure and Applied Chemistry (IUPAC) has announced that recently discovered elements 113, 115, 117 and 118 will now be known as nihonium (Nh: Z = 113 ), moscovium ( Mc: Z = 115 ) , tennessine ( Ts : Z = 117 ), and oganesson ( Og : Z = 118 ). The four elements, which complete the seventh row of the periodic table.
• There are six names given to the groups or a cluster of groups on the basis of the similarity of their properties ( e.g., transition metals ).
Group 1: Alkali Metals ( except hydrogen )
Group 2: Alkaline Earth Metals
Group 3 - 12: Transition Metals
Group 16: Chalcogens
Group 17: Halogens
Group 18: Noble Gases ( Inert gases )
• Lanthanides ( Inner Transition Elements – First series ) – elements with atomic numbers 58 to 71
• Actinides ( Inner Transition Elements - Second series ) - elements from atomic numbers 90 to 103
All elements except transition or inner transition elements are also collectively called Main Group Elements.
Valence Electrons and the Periodic Table
Valence electrons are the outermost electrons in the valence shell (highest value of n) of a ground-state atom. They determine how an element reacts.
The number of valence electrons in an atom is reflected by its position in the periodic table of the elements (see Figure below). Across each row, or period, of the periodic table, the number of valence electrons in groups 1–2 and 13–18 increases by one from one element to the next. Within each column, or group, of the table, all the elements have the same number of valence electrons. This explains why all the elements in the same group have very similar chemical properties.
The group number of the representative elements is the number of valence electrons.
The representative elements are in columns A1 - A7. In an 18 column table the map is as follows:
A1 - column 1 ( hydrogen + alkali metals ) have 1 valence
A2 = column 2 ( alkaline earth metals ) have 2 valence
A3 = column 13 ( Boron family ) has 3 valence
A4 = column 14 ( Carbon group ) has 4 valence
A5 = column 15 ( Nitrogen family ) has 5 valence
A6 = column 16 ( Oxygen column : chalcogens ) have 6 valence
A7 = column 17 ( Fluorine column: halogens ) have 7 valence
Based on the figure above, it shows the number of valence electrons of each element in relation to its group number. Any element in group 1 has just one valence electron. Any element in group 8 ( column 18 ) has eight valence electrons with the exception of He which has a total of 2 electrons.
Properties of Families of Elements
Metalloids
These are elements with a mix properties of nonmetal and metal properties. The metalloids are hybrid elements. The most important characteristic of metalloids is that they partially conduct electricity for semi-conductors.
Nonmetals
Nonmetallic elements are brittle. They gain electrons to become anions.
Metals
Metallic elements are good electrical and heat conductors. They are malleable and ductile, possess metallic luster , opaque as thin sheet, and solid at room temperature ( except Hg ). They normally lose electrons to become cations.
Halogens
Elements under this group have seven valence electrons, which make them highly reactive for covalent bonds. Halogens form ionic bonds with all kinds of elements. Example is NaCl ( salt ).
Noble Gases
These are un-reactive elements because their outer shells are fully filled with eight electrons (except helium which has two).
Chalcogens
All chalcogens are very reactive to alkali earth metals. Lighter chalcogens such as sulfur and oxygen are non-toxic, and essential to all types of life. Heavier chalcogens like tellurium, selenium, and polonium are toxic and quite harmful. Each of these elements have 6 valence electrons.
Alkali Metals
Elements in the first group which have one valence electron. Alkali metals are very reactive because they only need to lose one electron to have a full shell.
Alkaline Earth Metals
These are elements under Group 2. They are also highly reactive, but not as reactive as the alkali metals, because they have two valence electrons. They are called alkaline metals because when they are mixed in solutions they form basic solutions.
Transition Metals
This make up the largest family in the periodic table. They are located between and including the following elements horizontally: scandium through copper, yttrium through silver, lanthanum through gold, actinium through all higher atomic numbers in that period. They have a lot of electrons (normally) and distribute them in many advanced/ complicated ways.
Lanthanides
These are groups of metals located on the second row from the bottom of the periodic table. They are fairly rare, their atomic numbers range from 57 (lanthanum) to 71 (lutetium). Some of these elements can be found in superconductors, glass production, or lasers.
Actinides
These are groups of metals in the bottom row of the periodic table. The actinide family contains fifteen elements starting with actinium through the entire row to lawrencium. All actinides are radioactive and some are not found in nature.
Related posts:
Periodicity
Periodicity refers to trends or recurring variations in element properties with increasing atomic number. Periodicity is caused by regular and predictable variations in element atomic structure.
Mendeleev organized elements according to recurring properties to make a periodic table of elements. Elements within a group (column) display similar characteristics.
The rows in the periodic table (the periods) reflect the filling of electrons shells around the nucleus, so when a new row begins, the elements stack on top of each other with similar properties. For example, helium and neon are both fairly unreactive gases that glow when an electric current is passed through them. Lithium and sodium both have a +1 oxidation state and are reactive, shiny metals.
Periodicity helped scientists find new elements because they could be expected to display certain characteristics based on the location they would take in the periodic table. Now that the elements have been discovered, scientists used periodicity to make predictions about how elements will behave in chemical reactions and their physical properties. Periodicity helps chemists predict how the new, super heavy elements might look and behave.
Periodic Variation in Atomic Properties
The valence electrons of an element is determined by the element’s position in the periodic table. Because the valence electrons determine the reactivity and chemical properties of an element, the periodic table is used as a map to determine the general properties of any element.
Elements are generally classified as either metals, nonmetals, or metalloids. Elements in each classification behave slightly in different ways. The number of protons in the nucleus, number of shells , and shielding effect are the three factors that help in the prediction of the trends in the periodic table. Below are some atomic properties and their periodic trend.
Atomic Radius
Atomic size is the distance from the nucleus to the valence shell where the valence electrons are located. Atomic radius is a more definite and measurable way of defining atomic size. It is the distance from the center of one atom to the center of another atom.
From top to bottom of the periodic table, the atomic radii increase. This is because the valence electron shell is getting larger and there is a larger principal quantum number, so the valence shell lies physically farther away from the nucleus.
Going across a row on the periodic table, left to right, although the valence shell maintains the same principal quantum number, the number of protons( the nuclear charge ) is increasing . The increasing positive charge casts a tighter grip on the valence electrons, thus, the atomic radii decrease
Ionization Energy
Ionization energy is the energy required to completely remove an electron from a gaseous atom or ion. The Ionization Energy is always positive.
From top to bottom of the periodic table, it becomes easier to remove an electron from an atom (i.e., IE decreases) because the valence electron is farther away from the nucleus, so ionization energy decreases.
From left to right, the electrons get drawn closer in. It takes more energy to remove an electron so ionization energy increases.
Electron Affinity
Electron affinity is the energy change that occurs when an electron is added to a gaseous atom. It is the opposite of ionization energy. Electron affinity can further be defined as the enthalpy change that results from the addition of an electron to a gaseous atom. It can be either positive or negative value. The greater the negative value, the more stable the anion is.
Electronegativity
Electronegativity is the measurement of an atom to compete for electrons in a bond. The higher the electronegativity, the greater its ability to gain electrons in a bond. Electronegativity determines polar and nonpolar molecules. Electronegativity is related with ionization energy and electron affinity. Electrons with low ionization energies have low electronegativities because their nuclei do not exert a strong attractive force on electrons. Elements with high ionization energies have high electronegativities due to the strong pull exerted by the positive nucleus on the negative electrons.
Metallic Character
The metallic character is used to define the chemical properties that metallic elements present. Generally, metals tend to lose electrons to form cations. Nonmetals tend to gain electrons to form anions. They also have a high oxidation potential therefore they are easily oxidized and are strong reducing agents. Metals also form basic oxides; the more basic the oxide, the higher the metallic character.
From left to right of the periodic table, the metallic character decreases, because the elements easily accept electrons to fill their valance shells. These elements take on the nonmetallic character of forming anions. From bottom to top, the metallic character decreases, due to the greater pull that the nucleus has on the outer electrons. This greater pull makes it harder for the atoms to lose electrons and form cations.
Summary of periodic trend of atomic properties;
Atomic Property From Left to Right From Bottom to Top
1. Atomic Radius Decreases Decreases
2. Ionization Energy Increases Increases
3. Electron Affinity Increases Increases
4. Electronegativity Increases Increases
5. Metallic Character Decreases Decreases
Predicting the Properties of Elements Based on Its Position in the Periodic Table
Elements are organized by period and group, with the period corresponding to the principal energy level, and the group relating to the extent the subshells are filled.
The properties of an atom relate directly to the number of electrons in various orbitals, and the periodic table is much like a road map among those orbitals such that chemical properties can be deduced by the position of an element on the table. The electrons in the outermost or valence shell are especially important because they can engage in the sharing and exchange that is responsible for chemical reactions.
Using periodic trends, the periodic table can help predict the properties of various elements and the relations between properties. It therefore provides a useful framework for analyzing chemical behavior and is widely used in chemistry and other sciences.
Atomic Orbitals
The electrons in the partially filled outermost shell (or shells) determine the chemical properties of the atom. It is called the valence shell. Each shell consists of one or more subshells, and each subshell consists of one or more atomic orbitals. The properties of an atom depend ultimately on the number of electrons in the various orbitals, and on the nuclear charge which determines the compactness of the orbitals.
Periods 1, 2, & 3
Shown below are the first three rows of the periodic table ( Period 1 , 2 , and 3 ) which corresponds to the principal energy levels ( n =1, n=2, and n=3 ).
Shown above are the electron configuration of the 18 elements. In each electron configuration , the principal energy level ( n ) and the valence electrons are shown. As mentioned, the properties of an element are dependent on the valence electrons.
The chemical properties are influenced by the valence (outer shell) electrons. Elements with the same number of valence electrons fall in the same column and exhibit similar chemical properties up to a point. For example, lithium, sodium, potassium, rubidium and cesium in column 1 are valence +1 and have similar alkaline chemistry tending to form ionic compounds that ionize and disperse in water solution.
Electronic Structure and Periodicity
Chemical Bonding : Octet Rule, Lewis Dot Structure, Ionic Bonding & Covalent Bonding
Chemical bonding is the attraction between atoms at varying strength that allows the formation of a new substance.
The Stability of Noble Gases
Noble gases are defined as the group of chemical elements with low chemical reactivity or un-reactive at all. . The noble gases have all their electronic shells saturated and therefore cannot readily make compounds. Generally, Noble gases have eight electrons in their valence shell, thus, they are in accordance with the octet rule.
Octet Rule
It refers to the tendency of atoms to prefer to have eight electrons in the valence shell. When atoms have fewer than eight electrons, they tend to react and form more stable compounds.
In octet rule, d or f electrons are not considered. Only the s and p electrons are involved in the octet rule. An octet corresponds to an electron configuration ending with s2p6.
Atoms will react to get in the most stable state possible. A complete octet is very stable because all orbitals will be full. Atoms with greater stability have less energy.
The other tendency of atoms is to maintain a neutral charge. Only the noble gases have zero charge with filled valence octets. All of the other elements have a charge when they have eight electrons all to themselves.
Atoms are more stable when they have no charge, or a small charge
Exceptions to the Octet Rule
1. Hydrogen and helium have only one electron shell. The first shell has only one s orbital and no p orbital, so it holds only two electrons. Therefore, these elements are most stable when they have two electrons.
Lithium, with three protons and electrons, is most stable when it gives up an electron.
2 Other notable exceptions are aluminum and boron, which can function well with six valence electrons ( less than an Octet ). Consider BF3. The boron shares its three electrons with three fluorine atoms. The fluorine atoms follow the octet rule, but boron has only six electrons. Although atoms with less than an octet may be stable, they will usually attempt to form a fourth bond to get eight electrons. BF3 is stable, but it will form BF4- when possible. Most elements to the left of the carbon group have so few valence electrons that they are in the same situation as boron: they are electron deficient. Electrons deficient elements often show metallic rather than covalent bonding.
3. In Period 3, the elements on the right side of the periodic table have empty d orbitals. The d orbitals may accept electrons, allowing elements like sulfur and phosphorus to have more than an octet. Compounds such as PCl5 and SF6 can form. These compounds have 10 and 12 electrons around their central atoms, respectively.
Xenon hexafluoride uses d-electrons to form more than an octet. This compound shows another exception: a noble gas compound.
4. Some elements, like nitrogen, have an odd number of electrons and will form somewhat stable compounds. Nitric oxide has the formula NO. No matter how electrons are shared between the nitrogen and oxygen atoms, there is no way for nitrogen to have an octet. It will have seven electrons instead. A molecule with an unpaired electron is called a free radical and radicals are highly reactive
Nitrogen dioxide has an unpaired electron. (Note the positive charge above the N).
Forming ions
Ions From Metal Elements
Generally metals lose electrons to form cations with a positive charge equal to the group number. This ties into the octet rule because the metals revert to the octet rule for the previous row in the periodic table.
Examples:
* Calcium ( Ca ) - forms into Ca2+ cation since Ca belongs to Group 2A
and has the tendency to give up its 2 electrons
* Aluminum (Al ) - forms into Al3+ cation since Al belongs to Group 3A
and has the tendency to give up or lose its 3 electrons
* Potassium (K ) - forms into K1+ cation since K belongs to Group 1A and
has the tendency to lose its 1 electron
Ions from nonmetal elements
Generally nonmetal atoms gain electron to form ions with a negative charge. These are called anions. This ties into the octet rule because the nonmetals gain electrons to fill to the octet for their row in the periodic table. The charge equals the group number minus 8.
Example: What charge is expected for the ion formed by chlorine, Cl ?
Solution : Charge = Group number – 8 Note: Cl is under Group 7
= 7 – 8
= - 1
Transition elements are in the d-block metals. They generally do not follow the octet rule so it is more difficult to predict their charge ( oxidation number). They have electrons in the “ (n-1)d ns” sublevels.
For example iron has 8 electrons in the 3d64s2 subshells. The number of electrons lost is variable. Iron can be stripped of the "4s" electrons and one of the "3d" electrons or only the "4s" electrons. The other transition metals like copper, titanium, etc show similar behavior
Lewis Dot Structure
A Lewis structure ( named after Gilbert N. Lewis ), also known as “electron dot diagram”, is a diagram showing how the valence electrons are arranged around an atom, ion or molecule.
Lewis Dot structures for Elements
For Main Group (Representative) elements, the number of valence electrons is the same as the Group A number . All Group 1A elements have one valence electron, all Group 2A elements have two valence electrons and so on all the way over to the Noble Gases in Group 8A with 8 valence electrons. The table below shows the Lewis Dot structure for the elements in Period (row) 2. It would be noticed that the number of valence electrons for each Group matches its Group A number.
Lewis Dot Structure ( LDS ) for Ions
The LDS can also be drawn for ions, recognizing that a negative charge means that extra electrons have been acquired and that a positive charge means that electrons have been lost. Lewis Dot Structures for ions are always enclosed in brackets with the charge indicated outside. Below are examples:
Ionic Bonding
Ionic bonding is the transfer of valence electron(s) between atoms. It is a type of chemical bond that generates two oppositely charged ions. In ionic bonds, the metal loses electrons to become a positively charged cation, whereas the nonmetal accepts those electrons to become a negatively charged anion.
By losing electrons, metals can achieve noble gas configuration and satisfy the octet rule. Similarly, nonmetals that have close to 8 electrons in their valence shells tend to readily accept electrons to achieve noble gas configuration. In ionic bonds, the net charge of the compound must be zero.
Illustration 1: Ionic bonding between Na and Cl
2 s2 2s2 3s2 4s2
Na 1s2 3s1 Cl 1s2 3p6 4p5
2p6 2p6 3d10
This sodium molecule donates the lone electron in its valence orbital in order to achieve octet configuration. This creates a positively charged cation due to the loss of electron. This chlorine atom receives one electron to achieve its octet configuration, which creates a negatively charged anion.
Illustration 2: Ionic bonding between Mg and Chlorine Using the Lewis Dot
Structure
In this example, the magnesium atom is donating both of its valence electrons to chlorine atoms. Each chlorine atom can only accept 1 electron before it can achieve its noble gas configuration; therefore, 2 atoms of chlorine are required to accept the 2 electrons donated by the magnesium. Notice that the net charge of the compound is 0.
Lewis Dot Structure for Some Ionic Compounds
Cations are formed when atoms lose electrons, represented by fewer Lewis dots, whereas anions are formed by atoms gaining electrons. The total number of electrons does not change. The table below shows how an ionic compound is illustrated by Lewis dot structure.
.
Ionic Compounds and Properties
Molecules that consist of charged ions with opposite charges are called ionic.
Ionic compounds are formed from metal and non-metal elements.
Examples of ionic compound are :
NaCl BaO Al2S3
Sodium Chloride Barium oxide Aluminum sulfide
Some properties of ionic compound are : they form crystal lattices ,have higher enthalpies of fusion and vaporization, hard, brittle, have high melting and boiling points, and conduct electricity in aqueous solution.
Formula of Ionic compound
The strong attraction between positive and negative ions often produces crystalline solids that have high melting points. Ionic bonds form instead of covalent bonds when there is a large difference in electronegativity between the ions. The positive ion, called a cation, is listed first in an ionic compound formula, followed by the negative ion, called an anion.
A balanced formula has a neutral electrical charge or net charge of zero.
Predicting the Type of Chemical Bond Based on Electronegativity
If the electronegativity values of two atoms are:
• similar...
• Metallic bonds form between two metal atoms.
• Covalent bonds form between two non-metal atoms.
*Nonpolar covalent bonds form when the electronegativity values are very similar.
*Polar covalent bonds form when the electronegativity values are a little further apart.
• different...
Ionic bonds are formed.
Determining the Formula of an Ionic Compound
A stable ionic compound is electrically neutral, where electrons are shared between cations and anions to complete outer electron shells or octets. The correct formula for an ionic compound is attained when the positive and negative charges on the ions are the same or "cancel each other out".
In writing ionic compound formula, determine first the charge on an ion. For the representative elements, the charge of the ion is related to the column or group that the element is in.
• Group IA elements have only one valence electron, so when they lose that electron they will have a +1 charge.
• Group IIA elements have two valence electrons. When they lose their two valence electrons they will have a +2 charge.
• Group IIIA elements have three valence electrons. They lose their three electrons to form +3 ions.
• Group IVA elements are somewhat of an exception to the trend. Tin (Sn) and lead (Pb) can lose multiple electrons to form differently charged ions. Carbon, silicon and germanium rarely form ions.
• Group VA elements have five valence electrons. Instead of losing these five electrons, Group VA elements will gain three electrons to have a -3 charge.
• Group VIA elements have six valence electrons and gain two electrons to have a -2 charge.
• Group VIIA elements have seven electrons in their outer shell. These elements gain one electron to have a -1 charge.
Transition metals are elements that are in groups IB to XB. These metals are capable of losing different numbers of electrons and can take multiple ionic forms. The names of transition metal ions contain Roman numerals to indicate the ions' charge.
For example, lead (II) nitrate contains a +2 lead ion (Pb2+ ). Vanadium (IV) oxide contains a +4 vanadium ion ( V4+).
Steps for writing and balancing the formula:
1. Identify the cation ( the portion with a positive charge). It is the least electronegative (most electropositive) ion. Cations include metals and they are often located on the left-hand side of the periodic table.
2. Identify the anion ( the portion with a negative charge). It is the most electronegative ion. Anions include halogens and nonmetals. Keep in mind, hydrogen can go either way, carrying either a positive or negative charge.
3. Write the cation first, followed by the anion.
4. Adjust the subscripts of the cation and anion so the net charge is 0. Write the formula using the smallest whole number ratio between the cation and anion to balance charge.
5. If the charges of the cation and anion are equal (e.g., +1/-1, +2/-2, +3/-3), then combine the cation and anion in a 1:1 ratio. An example is potassium chloride, KCl. Potassium (K+) has a 1- charge, while chlorine (Cl-) has a 1- charge. Note that you do not ever write a subscript of 1.
6. If the charges on the cation and the anion are not equal, add subscripts as needed to the ions to balance the charge. The total charge for each ion is the subscript multiplied by the charge. Adjust the subscripts to balance charge. An example is sodium carbonate, Na2CO3. The sodium ion has a +1 charge, multiplied by the subscript 2 to get a total charge of 2+. The carbonate anion (CO3-2) has a 2- charge, so there is no additional subscript.
7. If you need to add a subscript to a polyatomic ion, enclose it in parentheses so it is clear the subscript applies to the entire ion and not to an individual atom. An example is aluminum sulfate, Al2(SO4)3. The parenthesis around the sulfate anion indicates three of the 2- sulfate ions are needed to balance 2 of the 3+ charged aluminum cations.
Examples of ionic compounds
Many familiar chemicals are ionic compounds. A metal bonded to a nonmetal is a dead giveaway that you're dealing with an ionic compound. Examples include salts, such as table salt (sodium chloride or NaCl) and copper sulfate (CuSO4).
Covalent Bonding
Covalent bonding is the sharing of valence electrons between atoms. This type of bonding occurs between two atoms of the same element or of elements close to each other in the periodic table. This bonding occurs primarily between nonmetals; however, it can also be observed between nonmetals and metals. Thus, covalent or molecular compound is formed by the sharing of electrons between atoms.
If atoms have similar electronegativities (the same affinity for electrons), covalent bonds are most likely to occur. Because both atoms have the same affinity for electrons and neither has a tendency to donate them, they share electrons in order to achieve octet configuration and become more stable. In addition, the ionization energy of the atom is too large and the electron affinity of the atom is too small for ionic bonding to occur. For example: carbon does not form ionic bonds because it has 4 valence electrons, half of an octet. To form ionic bonds, Carbon molecules must either gain or lose 4 electrons. This is highly unfavorable; therefore, carbon molecules share their 4 valence electrons through single, double, and triple bonds so that each atom can achieve noble gas configurations. Covalent bonds include interactions of the sigma and pi orbitals; therefore, covalent bonds lead to formation of single, double, triple, and quadruple bonds.
Covalent bonds form between non-metal atoms. Each bond consists of a shared pair of electrons, and is very strong.
Lewis Dot Structure of Molecules
The Lewis structure is used to represent the covalent bonding of a molecule or ion. Covalent bonds are a type of chemical bonding formed by the sharing of electrons in the valence shells of the atoms. Covalent bonds are stronger than the electrostatic interactions of ionic bonds. Most bonding is not purely covalent, but is polar covalent (unequal sharing) based on electronegativity differences.
The atoms in a Lewis structure tend to share electrons so that each atom has eight electrons (the octet rule). The octet rule states that an atom in a molecule will be stable when there are eight electrons in its outer shell. Lewis structures display the electrons of the outer shells because these are the ones that participate in making chemical bonds.
For simple molecules, the most effective way to get the correct Lewis structure is to write the Lewis diagrams for all the atoms involved in the bonding and adding up the total number of valence electrons that are available for bonding. The element which is the least electronegative is the center of the compound.
Example 1: Draw the Lewis Dot structure for water ( H2O )
1. Hydrogen atoms are always placed on the outside of the molecule making
oxygen as the central atom.
2. One dot ( 1 valence e- ) is assigned for each hydrogen and 6 dots ( 6 valence
e- ) for oxygen. There are now a total of 8 electrons which conform to the
octet rule.
3. Each o f the two unpaired electrons of the oxygen atom will form a bond
with one of the unpaired electrons of the hydrogen atoms. The bonds formed
by the shared electron pairs can be represented by either two closely places
dots between two element symbols or more commonly by a straight line
between element symbols:
Example 2: Draw the Lewis structure for methane (CH4).
Hydrogen atoms are always placed on the outside of the molecule, so carbon should be the central atom.
There is now a total of 8 valence electrons [4 from carbon + 4(1 from each hydrogen] .
Lewis Structures of Polyatomic Ions
Building the Lewis Structure for a polyatomic ion can be done in the same way as with other simple molecules, but we have to consider that we will need to adjust the total number of electrons for the charge on the polyatomic ion. If the ion has a negative charge, the number of electrons that is equal to the charge on the ion should be added to the total number of valence electrons. If the ion has a positive charge, the number of electrons that is equal to the charge should be subtracted from the total number of valence electrons. After writing the structure, the entire structure should then be placed in brackets with the charge on the outside of the brackets at the upper right corner.
Example 1: Write the Lewis structure for the ammonium ion (NH4+).
Hydrogen atoms are always placed on the outside of the molecule, so nitrogen should be the central atom.
After counting the valence electrons, we have a total of 9 [5 from nitrogen + 4(1 from each hydrogen)] = 9. The charge of +1 means an electron should be subtracted, bringing the total electron count to 8.
Each hydrogen atom will be bonded to the nitrogen atom, using two electrons. The four bonds represent the eight valence electrons with all octets satisfied, so the structure is complete. (Do not forget to put brackets and charge on the outside of the brackets)
Example 2: Write the Lewis structure for the hydroxide ion (OH-).
Since there are only two atoms, begin with just a bond between the two atoms.
After counting the valence electrons, there is a total of 7 [6 from Oxygen + 1 from each Hydrogen)] = 7. The charge of -1 indicates an extra electron, bringing the total electron count to 8.
Oxygen will be bonded to the hydrogen, using two electrons. Place the remaining six electrons as three lone pairs on the oxygen atom. All octets are satisfied, so the structure is complete. (Do not forget to put brackets and charge on the outside of the brackets)
Example 3: Draw the Lewis structure for nitrate ion ( NO3 - )
Nitrogen is the least electronegative atom and should be the central atom.
After counting the valence electrons, we have a total of 23[5 from nitrogen + 3(6 from each oxygen)] = 23. The charge of -1 indicates an extra electron, bringing the total electron count to 24.
Each oxygen atom will be bonded to the nitrogen atom, using a total of six electrons. We then place the remaining 18 electrons initially as 9 lone pairs on the oxygen atoms (3 pairs around each atom).
Although all 24 electrons are represented in the structure (two electrons for each of the three bonds and 18 for each of the nine lone pairs), the octet for the nitrogen atom is not satisfied. To satisfy the octet rule for the nitrogen atom, a double bond needs to be made between the nitrogen and one of the oxygen atoms. Because of the symmetry of the molecule, it does not matter which oxygen atoms is chosen. Because there are three different oxygen atoms that could form the double bond, there will be three different resonance structures showing each oxygen atom with a double bond to the nitrogen atom. Double-headed arrows will be placed between these three structures. (Do not forget your brackets and to put your charge on the outside of the brackets)
Naming and Formulas for Molecular or Covalent Compounds
Covalent compounds are named in different ways than ionic compounds . Simple covalent compounds are generally named by using prefixes to indicate how many atoms of each element are shown in the formula. Also, the ending of the last (most negative) element is changed to -ide.
Prefixes which indicate the number of atoms of each element are used in the naming of inorganic molecular compounds. Below are the prefixes used in naming covalent compound.
mono- = 1 di- = 2 tri- = 3 tetra- = 4 penta- = 5
hexa- = 6 hepta- = 7 octa- = 8 nona- = 9 deca- = 10
When given a formula the prefixes above are applied to the words that would be used to name the compound as if it were ionic. For example, P2O3 would be named Phosphorous Oxide if it were ionic, but it consists of two nonmetals, so it would be named Diphosphorous Trioxide.
Whenever there is only one atom of the first element in a formula , drop the term Mono-. For example CO is Carbon Monoxide, not Monocarbon Monoxide.
To write formulas , just interpret the prefixes on the names and write the appropriate symbolic representation. For example, Sulfur Dioxide is SO2.
Examples:
1. Write the molecular formula of the following:
a. Carbon Tetrachloride - CCl4
b. Trinitrogen Pentoxide - N3O5
2. Give the name of the molecular compound as shown by the molecular formula:
a. N2O - Dinitrogen Oxide
b. CO2 - Carbon Dioxide
There are special cases where we use common names for molecular compounds. Examples of these are Water = H2O and Ammonia = NH3 (not to be confused with the ammonium ion = NH4+1
Polymers
Polymerization is the process of joining small molecules called monomers to form polymers.
Polymers are relatively large molecules consisting of a chain or network of many identical or similar monomers chemically bonded to each other. Monomer is a relatively small molecule that can form covalent bonds with other molecules of this type to form a polymer. Polymers consist of many repeating monomer units in long chains, sometimes with branching or cross-linking between the chains.
Structures of Some Monomers
Classification of Polymers
A. Based on Origin of Source
1. Natural Polymers– from living things ( ex. Cotton, silk, rubber )
2. Synthetic Polymers– man-made ( glue, PVC, Teflon )
B. Based on Structure
1. Linear – a polymer consisting of a single continuous chain of repeat units.
2. Branched-chain – a polymer that includes side chains of repeat units.
connecting onto the main chain of repeat units.
3. Cross-linked – a polymer that includes interconnection between chains
4. Network – a cross linked polymer that includes numerous interconnection
between chains.
C. Based on Molecular Forces
1) Thermoplastics are a type of polymer that become moldable and malleable
past a certain temperature and they solidify upon cooling.
2) Thermosets are synthetic fibers that become hard and cannot change shape
once they have set. They are often used in adhesives.
3) Elastomer is a term used interchangeably with rubber. It is a flexible
polymer.
4) Fibers are fibers created by improving upon natural plant and animal fibers
and make up a large category of polymers.
D. Based on Mode of Polymerization
1. Addition polymer – is formed when double bonds are broken in the individual
molecules and these rebond to another molecule so that long chains
are formed. Example is poly(phenylethene ).
. 2. Condensation polymer – is formed when molecules are joined together with
the elimination of some other compound ( usually water ). Examples
are nylon and polyester.
Various main chains and side chains are used to make different synthetic organic polymers. The backbones of common synthetic polymers are made of carbon-carbon bonds, whereas heterochain polymers have other elements (e.g. oxygen, sulfur, nitrogen) inserted along the backbone.
The seven most common types of synthetic organic polymers are: low density polyethylene (LDPE), high density polyethylene (HDPE), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), nylon, Teflon, and thermoplastic polyurethane (TPU).
Synthetic fibers are found in money, super glue, etc.
Synthetic Polymers in Everyday Us
Some familiar household synthetic polymers include nylons in textiles and fabrics, Teflon in non-stick pans, and polyvinyl chloride in pipes. The common PET bottles are made of a synthetic polymer, polyethylene terephthalate. The plastic kits and covers are mostly made of synthetic polymers like polythene, and tires are manufactured from Buna rubbers. Due to the environmental issues created by these synthetic polymers, which are often non-biodegradable and synthesized from petroleum, alternatives like bioplastics are also being considered. However, these bioplastics are often more expensive than synthetic polymers..
Types of Synthetic Polymers
1. Low Density Polyethylene
Low Density Polyethylene (LDPE) polymers are among the most common types of synthetic organic polymers, which are often found in households. LDPE is a thermoplastic made from the monomer ethylene. Despite competition from more modern polymers, LDPE continues to be an important plastic grade.
2. High Density Polyethylene
High Density Polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum.
3. Polypropylene
Polypropylene (PP), also known as polypropene, is a thermoplastic polymer used packaging and labeling materials, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes. An additional polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases, and acids.
4. Polyvinyl Chloride
Polyvinyl Chloride (PVC) is the third-most widely produced plastic, after polyethylene and polypropylene. PVC is used in construction because it is cheaper and stronger than more traditional alternatives such as copper or ductile iron., PVC is used in clothing and upholstery, electrical cable insulation, inflatable products, and many applications in which it replaces rubber.
5. Polystyrene
Polystyrene (PS) is an aromatic polymer made from the monomer styrene, a liquid petrochemical. PS is a colorless solid that is used in disposable cutlery, plastic models, CD and DVD cases, and smoke detector housigs. Products made from foamed polystyrene include packing materials, insulation, and foam drink cups.
6. Nylon
Nylon,is a family of synthetic polymers known generically as polyamides . Nylon is one of the most commonly-used polymers. The amide backbone present in nylon causes it to be more hydrophilic. It would be noticed that nylon clothing will absorb water. This is because nylon can engage in hydrogen bonding with water, unlike the purely hydrocarbon polymers that make up most plastics.
7. Teflon
Teflon (Polytetrafluoroethylene or PTFE) is a synthetic fluoropolymer of tetrafluoroethylene. PTFE is a solid, high-molecular-weight compound consisting entirely of carbon and fluorine. PTFE is hydrophobic: neither water nor water-containing substances can interact with PTFE. PTFE is used as a non-stick coating for pans and other cookware because it has very low friction with other compounds. It is very non-reactive, partly because of the strength of carbon–fluorine bonds, so it is often used in containers and pipework for reactive and corrosive chemicals. Where used as a lubricant, PTFE reduces friction, wear, and energy consumption of machinery.
8. Thermoplastic Polyurethane
Thermoplastic polyurethane (TPU) is any of a class of polyurethane plastic. It has many useful properties, including elasticity, transparency, and resistance to oil, grease, and abrasion. Most of these properties are resultant of the fact that TPU is hydrophilic and can react with water. Technically, TPU is a thermoplastic elastomer consisting of linear segmented block copolymers made of hard and soft segments
Biomolecues
Biomolecules
Biomolecules are very large molecules of many atoms covalently bonded together. All biomolecules contain carbon ( C ). Biomolecules are substances which are present exclusively in the living organisms. These include carbohydrates, proteins, fats and nucleic acid.
Each biomolecule is essential for body functions and manufacture within the body. They can vary in nature, type, and structure where some may be straight chains, some may be cyclic rings or both. Also, they can vary in physical properties such as water solubility and melting points.
Characteristics of Biomolecules:
• most of them are organic compounds
• they have specific shapes and dimensions
• functional group determines their chemical properties
• many of them are asymmetric
• macromolecules are large molecules and are constructed from small building block molecules
• building block molecules have simple structure
4 Major Types of Biomolecules
A. Carbohydrates
Carbohydrates are very important sources of energy for any physical body function. Carbohydrates are essential macromolecules that are classified into three subtypes: monosaccharides, disaccharides, and polysaccharides.
Classification of Carbohydrates
1. Monosaccharides
These are simple sugars made up of three to seven carbons They can exist as a linear chain or as ring-shaped molecules. Glucose ( C6H12O6 ) is a common monosaccharide. Glucose ( also known as dextrose ) and the final product of photosynthesis ), galactose ( found in milk sugar ), and fructose ( fruit sugar ) are monosaccharide isomers.
2. Disaccharides
Sugars formed when two monosaccharides undergo a dehydration reaction (a condensation reaction). They are held together by a covalent bond. Sucrose ( table sugar ) is the most common disaccharide, which is composed of the monomers glucose and fructose. Other disaccharides include lactose ( milk sugar ) and maltose ( malt sugar )
3. Polysaccharide
Also known as glycose, it is a long chain of monosaccharides linked by glycosidic bonds. The chain may be branched or unbranched and can contain many types of monosaccharides. Examples of polysaccharides are glycogen ( stored sugar in animals ), cellulose, and starch.
B. Lipids
Lipids are a group of water-insoluble compounds which include fats, glycerol, phospholipids, steroids, oils etc. Types of lipids vary according to their constituents . Fatty acids are simple lipids made up of carboxyl group and a variable group, R . Fats may be saturated ( having single bonds ) or unsaturated ( having double bonds ) and can be unhealthy but essential to plants and animals for important functions. Fats provide energy, insulation, and storage of fatty acids for many organisms.
Classification of Lipids
1. Triglyceride - a glycerol combined with fatty acids. It includes fats and oil. Triglycerides are abundant and constitute about 98 percent of all dietary lipids. The rest consists of cholesterol, its esters and phospholipids. Unlike carbohydrates, which can be stored only for a short time in the body, triglycerides are stored in the body in large amounts as body fat, which can last for years.
2. Phospholipids - lipids consisting of phosphorus group along with the organic chain. Phospholipids are major components of the plasma membrane, the outermost layer of animal cells. Phospholipids contain fatty acids, glycerol, nitrogen bases, phosphoric acid, and other substituents. They are most abundant in cell membranes and serve as structural components. They are not stored in large quantities. As their name implies, phospholipids contain phosphorus in the form of phosphoric acid groups. Their molecular structure is polar, consisting of one hydrophilic head group and two hydrophobic tails.
3. Steroids
Steroids play roles in reproduction, absorption, metabolism regulation, and brain activity. Steroids are lipids because they are hydrophobic and insoluble in water, but they do not resemble lipids since they have a structure composed of four fused rings.
Cholesterol is the most important steroid and is the precursor to vitamin D, testosterone, estrogen, progesterone, aldosterone, cortisol, and bile salts. Cholesterol is a component of the phospholipid bilayer and plays a role in the structure and function of membranes. Steroids are found in the brain and alter electrical activity in the brain.Because they can tone down receptors that communicate messages from neurotransmitters, steroids are often used in anesthetic medicines.
C. Protein
Proteins make up the majority of biomolecules present in a cell. Proteins are responsible for many enzymatic functions in the cell and play an important structural role. Proteins are composed of subunits called amino acids ( the building block of protein ). Amino acids are composed of a carboxyl group and an amino group bound to a central carbon atom.
A hydrogen atom occupies the third bonding site on the carbon and a variable “R” group occupies the fourth. This R group gives the amino acid special properties that are responsible for making proteins functional. Long chains of amino acids, formed by peptide bonds between each amino acid, form a polypeptide. Proteins help in tissue and cell formation.
Structure of Amino Acid
D. Nucleic Acids
Nucleic acids are the genetic materials present in an organism which includes DNA and RNA. Nucleic acids are the combination materials of nitrogenous bases, sugar molecules and phosphate group linked by different bonds in a series of steps. Our body consists of heterocyclic compounds like pyrimidines and purines. These are nitrogenous compounds like adenine, guanine, cytosine, thymine, and uracil. When these bases bond with sugar chains, nucleosides are formed. Nucleosides in turn bond with a phosphate group to give nucleotides like DNA and RNA. DNA carries the hereditary information and RNA helps in protein formation for the body.
Nucleic acid enzymes catalyze biochemical reactions in both catabolism and anabolism of macromolecules.
Catabolism is the breakdown of biomolecules in living organisms.
Anabolism is the synthesis of complex biological macromolecules.
DNA Structure
Deoxyribonucleic acid or DNA is a molecule that contains the instructions an organism needs to develop, live and reproduce. These instructions are found inside every cell, and are passed down from parents to their children. DNA is made up of molecules called nucleotides. Each nucleotide contains a phosphate group, a sugar group and a nitrogen base. The four types of nitrogen bases are adenine (A), thymine (T), guanine (G) and cytosine (C). The order of these bases is what determines DNA's instructions, or genetic code.
Nucleotides are attached together to form two long strands that spiral to create a structure called a double helix. If the double helix structure is as a ladder, the phosphate and sugar molecules would be the sides, while the bases would be the rungs. The bases on one strand pair with the bases on another strand: adenine pairs with thymine, and guanine pairs with cytosine.
DNA molecules are so long that they can't fit into cells without the right packaging. To fit inside cells, DNA is coiled tightly to form structures we call chromosomes. Each chromosome contains a single DNA molecule. Humans have 3 pairs of chromosomes, which are found inside the cell's nucleus.
DNA Sequencing
DNA sequencing is technology that allows researchers to determine the order of bases in a DNA sequence. The technology can be used to determine the order of bases in genes, chromosomes, or an entire genome.
DNA Replication
DNA is replicated (duplicated) before a cell divides. Because the two strands of a DNA molecule have complementary base pairs, the nucleotide sequence of each strand automatically supplies the information needed to produce its partner. If the two strands of a DNA molecule are separated, each can be used as a pattern or template to produce a complementary strand. Each template and its new complement together then form a new DNA double helix, identical to the original.
Before replication can occur, the length of the DNA double helix about to be copied must be unwound. In addition, the two strands must be separated, by breaking the weak hydrogen bonds that link the paired bases. Once the DNA strands have been unwound, they must be held apart to expose the bases so that new nucleotide partners can hydrogen-bond to them.
The enzyme DNA polymerase then moves along the exposed DNA strand , joining newly arrived nucleotides into a new DNA strand that is complementary to the template.
Molecular Geometry